Docker scissor lift – Buy Ukrainian

A scissor lift or scissor table is a hydraulic, highly efficient means of mechanizing lifting operations. The scope of application of this equipment is warehouse complexes, catering, shopping centers, production workshops, automotive service, etc. д.
Hydraulic lifts are easy to use and characterized by low operating costs. The trend towards the use of the most efficient technologies widely used in the world practice leaves no doubt that this type of equipment will take a worthy place in the construction, re-equipment and equipping of many facilities in our country.

Lifting efficiency of the hydraulic scissor lift is up to 6 m. It is technically and economically inefficient to use scissor lifts for lifting to high heights, as it is more efficient to use an elevator or cantilever lift in such cases.

The lifting capacity of such equipment ranges from 500 kg to 5 tons. The lifting speed depends on the lifting height and load capacity.

he principle of operation of a scissor lift is simple. The lift platform moves in a vertical plane. The control panel drives the electric motor, turns on the hydraulic pump, and extends the hydraulic cylinder rods to activate the scissor mechanism. The platform is lifted to the specified height. The platform descends under its own weight or the weight of the load. The lift control panel can be stationary and remote. To stop the platform at the desired height, use limit switches or the “Stop” button on the control panel.
Lifts can be single-scissor or multi-scissor (the number of cross-shaped linkages). A twin scissor mechanism is used to increase the length of the platform. There are also extractors with a rotating disk on the main platform, which allows you to work with loads that need to be deployed during operation. It is possible to equip the design with a large number of additional options that are selected individually for each product based on the operating conditions.
It is recommended to install lifting tables in a pit so that its vertical surface is at floor level. Lifts can also be used in the catering industry, but to work with food, its surface must be made of stainless steel.
Scissor lifts provide mechanized lifting of large and heavy workpieces, sheet material, parts, dies and other piece loads to the level of the process equipment worktable or to a position convenient for further reloading. Scissor lifts can be used as workstations for assembly, welding, picking, etc., where it is necessary to change the position of the cargo or product in height or space relative to the worker. Scissor lifts are also highly effective for lifting goods between floors, both in production and in everyday life – saving money in construction work, since the installation does not require a supporting shaft with an engine room, as with elevators.
Scissor lifts are also used where overhead cranes, stackers, elevators and other lifting and handling equipment are not available or economically feasible. They have several degrees of protection, for example, the slightest contact with the safety frame (optional) on the way down the platform will cause an immediate stop.
We would like to draw your attention once again to the fact that only properly selected equipment will operate at maximum efficiency. And remember that with proper maintenance, the service life of the equipment can be extended.
By purchasing Docker handling equipment (Ukraine) you get:
Development of structures by certified designers.
Manufacturing by qualified employees.
Quality control at all stages in accordance with the standards.
Price reduction with an increase in the order.
The warranty is 18 months.